Table of Contents
Advertisement
he AC symbol is used to indicate the required nature of the line module
input power.
he C- ick mark is a registered trademark of the Australian Spectrum
Management Agency.
Warning
The WARNING sign denotes a hazard. It calls attention to a procedure, which,
if not correctly performed or adhered to, could result in personal injury. Do
not proceed beyond a WARNING sign until the indicated conditions are fully
understood and met.
Caution
A
Caution
correctly performed or adhered to, could result in damage to or destruction
of the product. Do not proceed beyond a
conditions are fully understood and met.
afety Earth Ground
his is a Safety Class I product (provided with a protective earthing terminal). An
uninterruptible safety earth ground must be provided from the main power source to the
product input wiring terminals, power, cord, or supplied power cord set. Whenever it is likely
that the protection has been impaired, the product must be made inoperative and secured
against any unintended operation.
Before Applying Power
Verify that the product is con gured to match the available main power source. Refer to the
input power con guration instructions provided in this manual.
If this product is to be used with an autotransformer make sure the common terminal is
connected to the neutral (grounded) side of the main supply.
ervicing
Any servicing, adjustment, maintenance, or repair of this product must be performed only
by quali ed personnel. Capacitors inside this product may still be charged even when
disconnected from their power source.
o avoid a re hazard, replacement fuses must have the required current rating and be of the
type speci ed in this manual.
note denotes a hazard. It calls attention to a procedure, that, if not
Caution
note until the indicated
General Information 1-3
Advertisement
Table of Contents
