How To Obtain Warranty Service - Bosch HGS8655UC Use And Care Manual

Problem
If the oven is cold with the oven con-
trol set to bake or broil.
Broil setting cannot be changed.
Oven control knob can turn from
Broil to bake temperatures.

How to Obtain Warranty Service

To obtain warranty service for your Product, you should
contact Bosch Customer Service at 1-800-944-2904 to
schedule a repair.
Model (E) number and FD number
When you contact our service, please have the Model
(E) number and the FD number for your appliance
available.
You can find this information on the rating label
on the back side of the appliance
▯
on the underside of the projecting control panel
▯
Questions? Please contact us. We look forward to
hearing from you.
Suggestion
Check a cooktop burner for a few minutes to be sure gas is flowing to the
▯
range. If not, check your LP gas tank or or insulation valve in installation to
be open. If gas is available at cooktop burners, probably the start procedure
of oven burner was not executed correctly. Make sure that in start procedure
the knob is pressed in fully and listen for sparks and gas flow to the accord-
ing burner.
The push and turn feature may be preventing gas flow. Be sure to follow the
▯
instructions ~ Page 19 i.e. Press the control knob in for a few seconds
(this gets gas flowing), then turn to bake of broil and release. This lights the
gas.
The automatic start procedure will stop after 10 sec (no more sparking),
▯
than you can check whether flame is generated by opening appliance door
(bake burner visible through holes in bottom sheet, broil burner is free). If no
flame visible- keep open oven door for 5 minutes, than close and try again.
This is correct, broil has only one setting, marked by the word broil. To reduced
or increasing broiling intensity, move the rack up or down. Follow the instruc-
tions for racks ~ Page 10
This is correct. The control knob can only be turned from broil to bake, or vice
versa, via the off position.
31