IBM SAN128B-7 Installation, Service And User Manual page 93

Storage networking
Table of Contents

Advertisement

Table 14. Critical information checklist (continued)
Checked?
Information about the new chassis
2. Open a telnet session and log into the device as admin. The default password is password. Enable
the logging function on your telnet or serial console connection.
3. Back up the current configuration by entering configUpload. Enter the requested information at the
prompts.
Note: If you are using the Virtual Fabric feature, run configupload -vf before running the
configupload command to save the logical switch configuration.
This configUpload command uploads the device configuration to the customer-defined FTP server,
making it available for downloading. Alternatively, you can save the configuration file to a USB device.
For more information about this command, refer to the Fabric OS Command Reference.
switch:admin> configupload
Protocol (scp, ftp, sftp, local)
Server Name or IP Address [host]: 123.123.123.123
User Name [user]: Admin24
Path/Filename [<home dir>/config.txt]: config-switch0.txt
Section (all|chassis|switch [all]): all
Password:
Upload complete
switch: admin>
4. Record the WWN value: Enter wwn, and then copy the command output into a file named config-
miscinfo.txt.
switch:admin> wwn
10:00:00:60:69:00:00:0a
5. Enter ipAddrShow, and then copy the command output into the config-miscinfo.txt file.
switch:admin> ipaddrshow
SWITCH
Ethernet IP Address: 14.25.60.14
Ethernet Subnetmask: 255.55.0.0
Gateway IP Address: 14.25.43.1
DHCP: Off
6. Display and record the manufacturer serial numbers.
Enter chassisShow, and then copy the command output into the config-miscinfo.txt file.
"Factory Serial Num" and "Serial Num" are listed under "Chassis/WWN Unit 1" and "Chassis/WWN
Unit 2". If the current WWN cards are the original cards, the factory serial number listed is the same
as the chassis serial number.
CHASSIS/WWN
Unit: 1
Header Version:
Power Usage:
Factory Part Num:
Factory Serial Num:
Manufacture:
Update:
Data
Notes regarding supportshow
output
New factory serial number
New serial number (if available)
[ftp]: ftp
2
-288W
40-1000864-11
CWA2551K00V
Day:
1
Month: 11
Year: 2014
Day: 29
Month:
6
Year: 2017
Notes
Chapter 9. Chassis replacement 69

Advertisement

Table of Contents
loading

Table of Contents