Table of Contents
Advertisement
Table 4. Installation prerequisites (continued)
Task
Review and verify installation
requirements.
Gather network configuration
parameters.
Installation and initial configuration
The initial setup includes mounting the device on a flat surface or in a rack and completing the
configuration tasks necessary to bring the device online and verify the operation.
Table 5. Installation and basic system configuration
Task
Mount the device.
Check the airflow of the power
supply and fan assembly
Gather all components required
for the initial setup.
Provide power to the device.
Attach a management station,
establish a serial connection,
and change the default
passwords (optional).
Set the IP address, subnet
mask, and the default gateway
IP address.
Task details or additional information
Verify that the following requirements are met. Refer to "Facility
requirements" on page 5.
• Power requirements
• Environmental requirements
• Clearance for standalone or rack installation
• IP address:
• Subnet mask:
• Default gateway:
• Domain ID:
• Time zone:
Task details or additional information
Choose one of the following mounting options:
• Mount the device as a standalone unit. Refer to"Standalone
installation " on page 10.
• Mount the device in a four-post rack. Refer to"Installing the
Universal Four-Post Rack Kit" on page 11.
• Mount the device in a two-post rack. Refer to"Installing the
Universal Two-Post Rack Kit" on page 24.
The airflow direction of the power supply and fan should match.
The power supplies and fan trays are clearly labeled with either a
green arrow with an "E", or an orange arrow with an "I." For more
details, refer to "Identifying the airflow direction" on page 56.
Refer to "Items required" on page 34.
Refer to "Providing power to the device" on page 34.
Refer to "Establishing a first-time serial connection" on page 34.
After completing this task, log in to the serial port to configure the
device.
Use the ipaddrset command to configure a static device IP
address, subnet mask, and gateway IP address, or you can use
a DHCP server to obtain the information dynamically. Refer to
"Configuring the IP address" on page 35.
Chapter 2. Preparing for the Installation 7
Complet
ed
Complet
ed
Advertisement
Table of Contents
