IBM SAN128B-7 Installation, Service And User Manual page 100

System component
FCIP (IP over Fibre
Channel)
Port Status
Other
System component
Serial console port
Ethernet management
port
USB port
LEDs
System component
System power LED
System status LED
Ethernet port link LED
Ethernet port activity LED
Serial console port LED
FC port status LED
Power supply status LEDs
Fan assembly status LED
Other
System component
Serial cable
RJ-45 to DB9 adapter
76 IBM Storage Networking SAN128B-7: SAN128B-7 Installation, Service, and User Guide
Description
Complies with FC-IP 2.3 of FCA profile
Bicolor LED (amber/green) for SFP+ ports. Tricolor LED (white/amber/green) for DD
ports.
Description
One three-wire (Tx, Rx, GND) UART RJ-45 serial port.
One 1000/100/10 Mbps Ethernet port
One external USB port
Description
One green system power status LED (lower) on the port side.
One bicolor (green/amber) system status LED (upper) on the port side.
One green link LED to the left of the RJ-45 connector on the port side.
One activity LED to the right of the RJ45 connector on the port side.
The serial console port LEDs on the port side remain off at all times, even when a
cable is inserted and the link is active.
112 port status LEDs on the port side of the switch: 96 bicolor (green/amber)
LEDs, one for each SFP+ port, and 16 tricolor (white/amber/green) LEDs, one for
each DD port.
One green OK status LED on each power supply assembly on the nonport-side of
the switch.
One amber FAIL status LED on each power supply assembly on the nonport-side of
the switch.
One bicolor fan assembly status LED on each fan assembly on the nonport-side of
the switch.
Description
RJ-45 console cable
RJ-45 to DB9 for console cable