Specifications - JUKI PS-800SB-2850 Instruction Manual

1. SPECIFICATIONS

1 Sewing area (X,Y)(mm)
2 Feed motion of feeding frame
3 Needle bar stroke
4 Max. sewing speed
5
Settable stitch length
6 Needle
7 Hook
8
Intermediate presser stroke
9
Lift of intermediate presser
10
Lift of disc presser
11 Memory of pattern data
12 Number of patterns that can be identified
13 Program input method
14 Data format
15 Main shaft servomotor power
16 Power consumption
17 Input voltage
18 Mass (gross mass)
19 Dimensions
20 Operating temperature range
21 Operating humidity range
22 Storage temperature range
23 Storage humidity range
24 Air pressure used
25 Needle highest position stop facility
26
Noise
27
Lubricating oil
Stitch pitch and the sewing speed
Number Stitch pitch
1 2.8 mm
2 3.0 mm
3 4.0 mm
4 5.0 mm
Note: The sewing machine must not run at the maximum
number of revolutions continuously for more than 15 min-
utes. The number of revolutions may vary even if the pitch
is consistent due to the change in the needle and material.
Fig. 1
280 × 500
Intermittent feed (2-shaft drive by stepping motor)
30.7mm
3,500sti/min (When stitching pitch is 2.2 mm or less)
For other stitch pitches and numbers of revolutions, refer to Fig. 1.
0.5 to 12.7 mm
DB × 1 #8 (#7 to #14)
Standard full-rotary hook
4 mm (Standard)
12mm
10mm
Max. 999 patterns
Max. 999 patterns
USB
DXF.AI.PLT.DST
550W
500VA
220V ± 10%
Standard type：293kg
1,470mm (W) × 1,150mm (L) × 1,310mm (H)
5 to 35℃
35 to 85% (No dew condensation)
-5 to 60℃
10 to 85%（(No dew condensation, 85 % applies to the case where the tem-
perature is 40 ˚C or lower)
0.5 to 0.6 MPa
After the completion of sewing, the needle can be brought up to its highest
position.
- Equivalent continuous emission sound pressure level (L
tion :
A-weighted value of 78.0 dB ; (Includes K
10821- C.6.2 -ISO 11204 GR2 at 2,800 sti/min.
#10 (Equivalent to JUKI NEW DEFRIX OIL No. 1)
#32 (Equivalent to JUKI NEW DEFRIX OIL No. 2), Lithium based grease No. 2
Grease information
Manufacturer: WERATCHE
Type and number: Lithium base 2# grease
Sewing speed Remarks
2,800 sti/min
2,500 sti/min
2,200 sti/min
1,800 sti/min
– 3 –
) at the worksta-
pA
= 2.5 dB) ; according to ISO
pA