Attaching The Needle - JUKI PS-800SB-2850 Instruction Manual

4-2. Attaching the needle

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
➊
❶ ❶
❷
❷ ❷
Use the specified needle for the machine. Use the
proper needle in accordance with the thickness of
thread used and the kinds of the materials.
1) Turn the handwheel to lift the needle bar to its
2) Loosen screw ❷ , and hold needle ❶ with its
D B
3) Insert the needle fully into the hole in the needle
A
C
4) Securely tighten screw ❷ .
5) Check that long groove C of the needle is facing
– 13 –
upper end.
Press the "Threading" on the operation panel.
indented part A facing exactly to the right in di-
rection B.
bar in the direction of the arrow until the end of
hole is reached.
exactly to the left in direction D.