Table of Contents
Advertisement
R
R R
F. Panel and Trim Set
Standard Size: 30"H x 40" W (762mm x 1016mm)
Large Size: 33" H x 50" W (838mm x 1270mm)
Included in Kit: 2 side panels, 1 top panel, 2 side trim, 1
top trim, 2 corner brackets and fastener package.
Tools Needed: Phillips and flat head screw drivers.
1. Unpack and lay out parts face down (flanges up) on a non-
abrasive surface as shown in Figure 21.1. Install (1) 8-2
x /8" screw into bottom tab of side panel.
2. Set the large hole at bottom of side curtain over screw
installed in Figure 21.2. Stand assembly on end and attach
and install (1) 8-2 x /8" screw through tab in side panel
and curtain. Lay face down as shown in Figure 21.3
. Align top panel to side panel setting clearance hole over
screw head in side panel/curtain assembly.
4. Install (2) 8-2 x /8" screws through holes in side panel
into top panel. Complete for both sides.
Corner
Bracket
Top Panel
Right
Trim
Right
*Right Side
Panel
Curtain
Figure 21.1
*Right and left side curtains
are shipped with the insert.
Figure 21.2
October 26, 2006
Corner
Bracket
Top Trim
Left
Trim
*Left Side
Left
Curtain
Panel
Figure 21.3
Figure 21.4
Figure 21.5
Figure 21.6
7014-083C
CB1200-I Pellet Insert
Page 21
Advertisement
Table of Contents
