Pressure Diverter (Four Port) - Haier GE CDT800P2N3S1 Technical Service Manual

https://appliancetechmanuals.com
Two Port Diverter Removal
The diverter top may be removed by removing
one 1/4-in. hex-head screw and pressing in on
the locking tab and turning counter-clockwise
(CCW) to remove. Removing the top will expose
the diverter check ball.

Pressure Diverter (Four Port)

The pressure diverter (four port) is the key
component which allows lower water use, by
alternating water to the:
• Lower spray arm
• Silverware wash
• Mid/upper spray system (bottle wash)
• Mid spray arm and upper spray system or
lower spray arm reverse (some models)
Operation
The rotation of the pressure diverter is counter-
clockwise (CCW) as viewed from the top. The
control will seek the lower primary as the start
of the circulation cycle. Lower reverse and
silverware wash are only used during the main
wash segment of a cycle. A short spray will be
detected from the silverware wash, mid and
upper spray systems as well as the lower reverse
until the diverter is positioned to the lower primary
port.
– 62 –