Removing An Expansion Card - HP iPAQ rx1900 Supplementary Manual

Removing an Expansion Card

To remove a Secure Digital (SD) expansion card from the expansion slot
on the HP iPAQ:
1.
Close all programs that are using the expansion card.
2.
Remove the card from the expansion slot by slightly pushing
down on the card to unlock it.
3. When the card disengages and pops up, pull it from the
expansion slot.
CAUTION: SD cards must be unlocked before removal.
To remove a Compact Flash (CF) expansion card from the expansion slot
on the HP iPAQ, pull it from the expansion slot.
NOTE: HP recommends inserting the protective plastic cards that came
with your HP iPAQ into the expansion slots when they are not in use.
58