Installing And Removing Programs - HP iPAQ rx1900 Supplementary Manual

Installing and Removing Programs

To install programs on your HP iPAQ:
1. Use the HP Desktop Cradle or autosync cable to connect your HP
iPAQ to your personal computer.
2.
Follow the instructions in the Installation Wizard provided with the
program you want to install.
3. Check the screen on your HP iPAQ to see if any further steps are
necessary to complete the program installation.
To remove programs from your HP iPAQ:
1. Tap Start > Settings > System tab > Remove Programs.
2.
Select the checkbox for the program(s) you want to remove, then
tap Remove.
NOTE: By removing a program from your HP iPAQ, you may increase
available memory on the device.
4