Manually Checking The Battery Charge Level - HP iPAQ rx1900 Supplementary Manual

Manually Checking the Battery Charge Level

To manually monitor the battery power:
1. Tap Start > Settings > System tab.
2. Tap Power.
If the battery charge level is low, connect to AC power using the HP
Desktop Cradle and the AC Adapter, or change the battery. For
information on purchasing an optional standard or extended battery, visit
the HP Web site at www.hp.com/go/ipaqaccessories.
To use a shortcut to view your battery charge level, tap the Battery icon
located in TodayPanel Lite.
TIP: To save battery power, tap Start > Settings > System tab >
Power > Advanced tab, then tap the Turn off device if not used
for checkbox and set it to turn your HP iPAQ off after a short time of not
being used.
1