Entering Text Using Block Recognizer - HP iPAQ rx1900 Supplementary Manual

Entering Text using Block Recognizer

1. From any program, tap the Input Selector arrow, and then
Block Recognizer.
2. Write characters, numbers, and symbols in the designated writing
area.
•
•
•
NOTE: Block Recognizer is available when text entry is possible.
TIP: For help with writing characters with Block Recognizer, tap the
question mark near the writing area.
Enter letters by writing in the abc (left) area of the box.
Enter numbers by writing in the 123 (right) area of the box.
Enter symbols and punctuation by tapping in either area of the
box and then writing the desired character.
15