Table of Contents
Advertisement
Section 6: Features & Benefits
Section 6: Features & Benefits
Features
Working width
Hydraulics
15 cu. in. Displacement motor
72" = 3" x 3" x 1/4" Tube Frame
90" = 6" x 3" x 1/4" Tube Frame
Angling adjustment:
22 degrees left & 18 degrees right
3/4" x 1 1/2"
Carbide tipped stud roller
16.5" x 6.5" Gauge wheels with
sealant
Side plates with storage
Two material control deflectors
Bi-directional roller
Variable roller speed
#50 Double continuous roller
chain
Cast Iron chain guard housing
Drive chain enclosed in oil bath
Replaceable skid shoes
Hydraulic Motor Warranty
Universal fit
24
SR2672 & SR2690 Skid Steer Powered Rakes 321-004M
Table of Contents
SR26 Series (Skid Steer)
72" & 90"
72": 11 GPM at 2200 psi
90": 15 GPM at 2500 psi
Able to handle high torque loads in heavy conditions.
Superior in strength.
Angling allows proper flow of material wanting to be windrowed to allow for easy
collection of large rocks and debris.
Carbide tipped studs are very tough, used in the mining industry, this offers a long life
to the studs. Studs can be replaced one at a time.
Easy to adjust vertically to set working depth. Has tall and wide tires that keep turning
in fluffy soil. Sealant helps seal against punctures.
Side plates can be used to hold dirt to aid in filling low spots. Easily store the side
plates on the Powered Rake so that they are always with the Rake when needed.
Material control deflectors determine what size of material to let pass through the
roller and what size to move out. Two deflectors allow for forward and reverse rotation
of the roller.
Enables more complete finish and control
RPM
180 to 260
variable roller speed is controlled by the skid steer hydraulics and
can be used in tight areas to lessen the possibility of flying debris.
Double chain can take the fluctuation loads from the roller due to varying ground
conditions.
Strong enough to protect chain in harsh conditions.
A small amount of oil keeps the chain and sprockets lubricated to keep abrasion to a
minimum.
Skid shoes protect larger and vital parts of the unit. As they wear due to soil contact,
they can easily be replaced.
2 Years parts and labor. Shows our confidence in the gearbox integrity.
Universal fit with new and late model skid steer units.
Benefits
6/11/14
Advertisement
Table of Contents
