Land Pride SR2672 Operator's Manual page 13

Powered rakes, skid steer
Hide thumbs Also See for SR2672:
Table of Contents

Advertisement

Section 1: Assembly & Set-up
Electrical Hook-Up Options
There are three electrical hook-up options available. Select the option purchased with the Powered Rake:
10' Long wire harness with Deutsch 14 pin power plug.
Refer to "Electrical Hook-up With Deutsch 14 Pin Plug" below.
Wire harness with Deutsch 2 pin power plug.
Refer to "Electrical Hook-up With Deutsch 2 Pin Plug" below.
Skid steer wire harness with red & black eyelets for connecting to 12V power source.
Refer to "Electrical Hook-up With Eyelets" on page 12.
Electrical Hook-up With Deutsch 14 Pin Plug
823-095A . . . . . . . DEUTSCH HD30 14 PIN PLUG 10'
Refer to Figure 1-5:
If Skid Steer Loader is equipped with a Deutsch 14 Pin
male connector, then push button control box can be
eliminated and the 10 foot long Deutsch 14 pin plug &
cable (#6) can be purchased to connect the solenoid
directly to the Skid Steer Loader controls.
1. Connect green & black wire plug (#1) to top solenoid
wire (#2).
2. Connect red and white wire plug (#3) to bottom
solenoid wire (#4).
3. Attach Deutsch 14 pin plug (#7) to the skid steer's
Deutsch 14 pin male plug.
4. Skip to "Operational Check" on page 12.
Electrical Hook-up With Deutsch 2 Pin Plug
323-096A . . .SWITCH & WIRE HARNESS DTP PLUG
Refer to Figure 1-6:
This switch and wire harness is designed for attaching
the Powered Rake to a Kubota CTL when a 14 pin
Deutsch plug is not available and 2 pin Deutsch plug
located behind the driver's seat is available. The 2 push
button control switch (#10) can be placed approximately
9 ft. from the solenoid valve.
1. Attach Deutsch 2 pin plug (#9) to the Kubota CTL
male plug located behind the driver's seat.
2. The push button control switch (#10) is mounted with
magnets on the back. Locate and mount this switch
in a convenient easy to reach location.
3. Connect power cord (#8) to control switch wire (#7).
4. Connect green & black wire connector (#1) to top
solenoid wire (#2).
5. Connect red and white wire connector (#3) to bottom
solenoid wire (#4).
6. Skip to "Operational Check" on page 12.
11
SR2672 & SR2690 Skid Steer Powered Rakes 321-004M
Table of Contents
.
Switch & Wire Harness For Kubota CTL Skid Steer
Green Wire
Red Wire
Solenoid Valve
Deutsch 14 Pin Plug & Cable
Figure 1-5
Green Wire
Figure 1-6
37138
Solenoid Valve
Red Wire
37139
6/11/14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr2690

Table of Contents