Section 1: Assembly & Set-up
Side Plate Assembly
Refer to Figure 1-2:
Included with the Powered Rake are two side plates, one
right-hand and one left hand.
1. Install rectangle holes in top of right-hand side
plate (#3) over mounting tabs in the rake frame and
pipe tube (#1) over side support pin (#2) as shown.
2. Secure right-hand side plate (#3) to the rake frame
with linchpin (#4).
3. Repeat steps 1 through 2 for left-hand end plate.
6/11/14
Table of Contents
SR2672 Side Plate Assembly (Right-Hand Side Shown)
SR2672 & SR2690 Skid Steer Powered Rakes 321-004M
Figure 1-2
24535
9