Resume Printing After Broken Dots Error Setting (Head Error Prt); Feed To Top Of Feed After Cover Close Setting (Feed Check) - Toshiba B-FP2D Series Key Operation Specification

7.4.16
This setting selects whether or not the printer resumes printing after a broken dots error occurs.

OFF

ON
Default value: OFF
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o
7.4.17
This setting selects whether or not the printer feeds the paper to the top of feed after the cover is closed.

OFF

ON
Default value: OFF (The printer does not feed the paper to the top of feed.)
<Supplemental Explanations>
The printer feeds the paper to the top of feed when the print mode is TPCL, TPCL1, or LABEL
and a sensor, transmissive or reflective is used.
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o

Resume Printing After Broken Dots Error Setting (Head Error PRT)

The printer does not resume printing after a broken dots error occurs.
The printer resumes printing after a broken dots error occurs.
C Mode
o

Feed To Top Of Feed After Cover Close Setting (Feed Check)

The printer does not feed the paper to the top of feed.
The printer feeds the paper to the top of feed.
C Mode
ｘ
ESC/POS Z Mode
RECEIPT,RECEIP
T1
o o
ESC/POS Z Mode
RECEIPT,RECEIP
T1
x x
-74-
S Mode
o
S Mode
x