Toshiba B-FP2D Series Key Operation Specification page 13

Cover open
（ON LINE）
Setting
mode
*About image in User System Mode, Refer to [6 DISPLAY PATTERN AND KEY OPERATION FOR SYS
TEM MODE AND USER MODE]
*About icon, Refer to [5.5.2 Icon]
（*1）The model name description
BFP 2 D
V 1 . 0 x
(*2) The remaining label description
TO DO: 0005
[The number of remaining labels to print] = [Specified number of labels to print] – [The number of normally printed
labels before occurrence of an error or placing the printer in pause]
When the number of remaining labels to print is zero, it is not displayed.
(*3) For B-FP2D-GH50 only, the following additional message is displayed.
IP address
Host name
Print method D: Direct thermal
2" width
Print width
Series model
revision up: SP, A-Z, a-z (Modify problem)
minor version 0-9 (Spec change)
Major version 1-9 (Spec change about hardware difference)
Firmware version: V
The number of remaining labels to print
The active IP address of the printer.
When the IP address is invalid, 000.000.000.000 is displayed.
The host name used for name resolution is displayed. (For dynamic IP address)
If the IP address is static, nothing is displayed.
←M
essage
← Message
← Icon
← Message (*3)
← Model name, Firmware version (*1)
-7-