7.4.12
This setting enables selecting the battery charge mode.
NORMAL
LOW
LOW2
Default value: NORMAL (JA Type, CN Type)
Support mode (o:valid、x:invalid)
TPCL, TPCL1,
LABEL
o
7.4.13
Set whether or not to check battery deterioration detection
Set to check for battery deterioration detection and display the result with an icon after charging is comple
te.
Displayed at the next start-up for offline charging.
If the outside temperature, battery temperature is 46 ° C or higher, or the charging time is less than 30
minutes during charging, battery deterioration is not detected.
For the icons to be displayed, see 5.5.2 Icon.
OFF
ON
Default value: OFF
Support mode (o:valid、x:invalid)
TPCL, TPCL1,
LABEL
o
Battery Charge Mode Setting (Charge Mode)
Normal mode
Battery protection mode (Low charge voltage)
NRcan Support
LOW2 (QM Type, QQ Type)
C Mode
o
Battery deterioration check(Battery CHK)
Check the battery when charging
Do not check battery when charging
C Mode
o
ESC/POS
Z Mode
RECEIPT,RECEIP
T1
o
o
ESC/POS
Z Mode
RECEIPT,RECEIP
T1
o
o
-72-
S Mode
o
S Mode
o