Step 5 - Label Guides; Step 6 - Sensor Position; Step 7 - Closing Label Head; Step 8 - Connecting Printer To Pc - Toshiba B-EX4T1 Printer Setups

Step 5 - Label Guides

With the Printhead open ensure that the labels are under the small
black sprung guides. Slide the green guide to the width of the label.

Step 6 - Sensor Position

Ensure that the sensor head is in the middle of the label

Step 7 - Closing Label Head

When loaded close the Printhead down, lift the front plate up and
turn the green knob to LABEL.

Step 8 - Connecting printer to PC

For easy setup use a USB cable (Alternatively everything can be done via the network web interface)
1) Connect a USB cable to the PC
2) Connect a Network cable to a live DHCP network to obtain an IP address.
3) Download and install the BCP setup software: https://www.toshibatec.com/download_overseas/printer/setting_tool/BCP_Series/ [1]
Page 3 / 6