STEERING-HYDROGEAR
12.
Fill the lower housing with 12 oz. of 737-0300A
Durina
grease. See Figure 6A.65.
TM
Figure 6A.65
13.
Press in the upper ball bearing into the upper
housing. See Figure 6A.66.
Figure 6A.66
68
Press in the upper
ball bearing
14.
Press the lower ball bearing into the upper hous-
ing. See Figure 6A.67.
Figure 6A.67
15.
Insert the input shaft thought the ball bearings
from the inside of the steering gear box.
See Figure 6A.68.
Inset the
input shaft
Figure 6A.68
A socket can
be used to press
in the ball bearing