Figure 4-27
Table 4-7
Power connector descriptions
Connector
P1
P2
P3
P4–P8
P9
P10–P14
P15
Optical drive
Your workstation might have a SATA or an IDE optical drive. To remove the optical drive.
1.
Disconnect power from the system (
panel
(Access panel on page
ENWW
Identifying correct power connections
Description
24–pin Power Connector
4–pin Memory Connector
8–pin CPU0 Connector
HDD/Optical Connector
Diskette Connector
HDD Connector
PCI-E Connector
58) and the front bezel
Pre-disassembly procedures on page
(Front bezel on page
Removing and replacing components
53). Remove the access
59).
77