Leg Installation - Viking VGR7362 Installation Manual

Installation - Ranges

Leg Installation

1
Legs are packed in cardboard top pack.
Note: Legs should be installed near to where
appliance is to be used, as they are
not secure for long transit.
3
Screw legs into couplings on all four corners.
The 48" W. ranges have two additional legs located in the center
of the unit.
2
1
2
2
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting.
Raise unit about a foot. Unscrew shipping bolts from couplings
on all four corners.
4
Lower range gently to keep any undue strain from
legs and internal mounting hardware.
16
1
3