Table of Contents
Advertisement
Leg Installation
1
Legs are packed in the cardboard top pack.
Note: Legs should be installed near to where
appliance is to be used, as they are
not secure for long transit.
3
Screw legs into couplings on all
four corners.
2
1
2
2
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting.
Raise unit about a foot. Unscrew temporary legs
from couplings .
4
Lower range gently to keep any undue strain from
legs and internal mounting hardware.
14
1
3
Advertisement
Table of Contents
