Table of Contents
Advertisement
Leg Installation
1
2
1
1
3
2
Note: It is strongly recommended
Legs are packed in cardboard top pack. Note: Legs
that a pallet or lift jack be used rather than tilting. Raise
should be installed near to where appliance is to be
unit about a foot. Unscrew shipping bolts from couplings on
used, as they are not secure for long transit.
all four corners .
3
4
Screw legs into couplings on all four corners. The 48" W.
Lower range gently to keep any undue strain from
ranges have two additional legs located in the center of
legs and internal mounting hardware.
the unit.
Leveling/Adjustments/Alignment
2
1
For uneven or sloped floors, level unit with metal
Measure the four corners in cutout area to verify
shims only, as the adjustment required may exceed
if flooring is level.
the thread available in the legs.
16
Advertisement
Table of Contents
