Table of Contents
Advertisement
Leg Installation
1
2
1
1
3
2
Legs are packed in cardboard top pack. Note: Legs should
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting. Raise unit about
be installed near to where appliance is to be used, as they
are not secure for long transit.
a foot. Unscrew shipping bolts from couplings on all four corners .
3
4
Screw legs into couplings on all four corners. The 48" W. ranges
Lower range gently to keep any undue strain from
have two additional legs located in the center of the unit.
legs and internal mounting hardware.
16
Advertisement
Table of Contents
