Installation - Ranges
NOTICE
DO NOT use the handle or oven door
to lift the oven. Remove door before
installation to ensure that it is not used to
lift the unit. DO NOT lift or carry the door
by the handle.
Removing the door must be done by your
dealer, a qualified licensed plumber, or
certified gas installer.
WARNING
TO PREVENT PERSONAL INJURY
Before removing the doors, make sure the
pins are properly installed in the hinges.
Failure to do so can result in personal injury
to hands and/or fingers.
Door Removal
1
Open door completely.
3
Slowly close until latches stop door.
DO NOT discard the metal brackets supplied with the
range. These are the anti-tip devices and must be installed
with the unit. Refer to "Antitip Device Installation" section
2
Fold latches backward until locked in place
4
Lift door up and out.
15