Changing The Console To External Terminal - HP Visualize b132L Service Handbook

Dealing with HPMC (Uncorrectable Error)
The value in the CPU State word indicates that register
values and addresses stored in Stable Storage at the
time of the HPMC were saved.
The value on the Cache Check word identifies that
logic in the processor module detected a (data) cache
parity error. Ignore the value in the System Controller
Status word.

Changing the Console to External Terminal

In the event that your console stops displaying to your
graphics device, use the following procedure to dis-
play to console to an external terminal:
1 Turn system power off.
2 Disconnect the PC keyboard connector from the system
rear panel.
3 Connect a serial terminal to the Serial 1 connector (the
top serial connector) on the system rear panel.
4 Power on the system.
The system will now display the console to the termi-
nal connected to the Serial 1 port.
Troubleshooting
91