Table of Contents
Advertisement
If you Select the Wrong Display in the HP User Tools Menu
If you select the wrong display in the HP User Tools menu, the display screen may become
blurred or unreadable. To correct this problem:
1. Restart the PC, either by switching the PC off then on, or by pressing [
+ [
]. The PC will perform its power-on-self-test (POST).
DEL
2. When POST completes, press [
prompt (C:\).
3. Type CD:\WINDOWS and press [
4. Type SETUP and press [
5. Press the up-arrow key to select the [Display] line, and press [
6. Select the line 640x480x16, and press [
7. Press [
] again to accept the configuration.
ENTER
8. Press [
] + [
CTRL
9. If neccessary, type WIN and press [
10. When Windows starts, select the correct display with HP User Tools. For further
information on HP User Tools, refer to the chapter on HPUtilities in Setting Up Your PC.
HP Vectra XU – Getting Started
] to bypass the startup files and display the MS-DOS
F5
ENTER
].
ENTER
] + [
] to restart the PC.
ALT
DEL
ENTER
If You Have a Problem with Your PC
].
].
ENTER
] to restart Windows.
] + [
ENTER
ALT
].
ENTER
50
]
Advertisement
Table of Contents
