Table of Contents
Advertisement
Connecting the Keyboard, Mouse, and Display
1. Connect the keyboard, mouse, and display to the back of the PC. If your PC has a
Matrox video adapter board, connect the video cable to the Matrox video connector.
The connectors are shaped to fit one way only.
2. Tighten the video cable attachment screws.
Mouse
NOTE
USA Only: for non-HP displays that do not have a ferrite bead on the video cable,
clamp the supplied ferrite bead onto the cable as close as possible to the end that
connects to the PC.
HP Vectra XU – Getting Started
Keyboard
Display
Preparing Your PC for Use
Matrox video
connector
10
Advertisement
Table of Contents
