Using the User Password Prompt
If you have set a User Password in the PC's SETUP program (as described in "Preparing
Your PC for Use"), the User Password prompt at power on appears when you:
switch ON the PC
reset the PC by pressing and holding the RESET button
exit the SETUP program.
When the User Password prompt appears, type your User Password and press [
If you type the wrong User Password, the prompt appears and you can't use the PC. Type
your User Password again.
You have three chances to enter the User Password. After three unsuccessful attempts, the
prompt "*" appears. You must restart your PC by pressing the RESET button, before you
can try again.
HP Vectra XU – Getting Started
Using Your PC
25
].
ENTER