HP Vectra XU5 Getting Started Manual page 46

Hp vectra xu5: quick start

Hide thumbs Also See for Vectra XU5:

Table of Contents

If You Can't Change Your User Password in SETUP

If you started the PC's SETUP program but you cannot change your User Password or

keyboard preferences, this is because these settings are protected.

1. Restart the PC's SETUP program and enter your User Password when requested.

2. Check that security mode has not been enabled using a switch on the PC's system

board. (Refer to the Setting Up Your PC manual supplied with your PC for details.)

HP Vectra XU – Getting Started

If You Have a Problem with Your PC

Table of Contents

Vectra xu Vectra xu 5/xx