HP Vectra XU5 Getting Started Manual page 26

Using the Keyboard Lock Button and Timer
When you set a User Password in the PC's SETUP program, you can use the Keyboard
Lock Button or Keyboard Lock Timer to prevent your PC being used.
Using the Keyboard Lock Button
1. To lock your PC, press the Keyboard Lock Button.
If you have not set a User Password, the PC "beeps" and the light next to the
Keyboard Lock Button lights up. With a User Password set, the light next to the
Keyboard Lock Button lights up.
Your keyboard and mouse lock, and the RESET and power buttons are disabled so
the PC can't be reset or turned OFF.
The screen goes blank if you enabled Screen Blanking in the SETUP program.
NOTE You cannot use Screen Blanking if your PC has a Matrox video adapter board.
The application that was running when you locked the PC keeps running.
2. To return to your program, type your User Password and press [
Using the Keyboard Lock Timer
When the Keyboard Lock Timer is set, the keyboard locks after a specified time since your
last keystroke or mouse click. The screen goes blank if you enabled Screen Blanking in the
SETUP program.
NOTE You cannot use Screen Blanking if your PC has a Matrox video adapter board.
To use your PC, type your User Password and press [
HP Vectra XU – Getting Started
].
ENTER
Using Your PC 26
].
ENTER