HP Vectra VLi8 Installation Manual page 7

Microsoft Windows 95
SR2.5
Connecting to a
Windows NT 4.0 Server
2 Installing the IBM Turbo 16/4 Token Ring ISA Adapter
Microsoft Windows 95 SR2.5
2 Installing the IBM Turbo 16/4 Token Ring ISA Adapter
Requirements
• HP Vectra with Windows 95 SR2.5.
• IBM Turbo 16/4 Token Ring ISA adapter and drivers disk version 2.22.
• Driver File: IBMTOK.SYS, version 10.27
• Microsoft Windows 95 SR2.5 media.
• Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink
IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols.
Device Configuration
Device Configuration
Interrupt
I/O Address
Procedure
1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token-Ring ISA
adapter into an ISA slot.
2 Connect network cable media to the IBM Turbo 16/4 Token-Ring ISA
adapter.
3 Power on the machine and start Windows 95SR2.5 and the Token Ring
card will be recognized as "IBM Turbo 16/4 Token Ring ISA Adapter".
Insert the "IBM Turbo 16/4 and Auto Wake Token-Ring ISA Adapter disk
2" and click on "Next".
4 Verify that "IBM Turbo 16/4 Token-Ring ISA Adapter" is listed and click
on "Finish".
5 Click on "OK" when the system prompts for the computer and workgroup
names.
6 Enter the Computer Name, Workgroup, and Computer Description in the
appropriate spaces and click on "Close" (Contact your network
administrator if you do not have the required information).
Vectra Vli8
10
300