HP Vectra VLi8 Installation Manual page 30

8 Type the path "A:\WFW" in the "Install Driver" dialog box, and then insert
the IBM Turbo 16/4 and Auto Wake Token Ring Adapter (Disk 2) into the
floppy drive, and click "OK".
9 Select "IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2/3/ODI" in the
"Unlisted or Updated Network Adapter" dialog box, and click "OK".
10 Make sure that the "IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2/3/
ODI" is selected in "Network Drivers".
11 Accept the applicable network protocols, and then click on "CLOSE".
12 At the "Network Setup" dialog box, click on "OK".
13 Specify your User Name, Workgroup, and Computer Name in "Microsoft
Windows Network Names" dialog box, and click on "OK". (The Drivers
will now start to copy).
14 To complete the installation, remove the Intel diskette from the floppy
drive and click on "Restart Computer" button in the "Windows Setup"
dialog box.
12 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter
Connecting to a Windows NT 4.0 Server