HP Vectra VLi8 Installation Manual page 20

Ibm turbo 16/4 token ring isa adapter

Hide thumbs Also See for Vectra VLi8:

Microsoft Windows NT

4.0 Workstation

Connecting to a Novell

NetWare 4.11 Server

8 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter

Microsoft Windows NT 4.0 Workstation

8 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter

Requirements

• HP Vectra with Windows NT 4.0 Workstation.

• IBM Turbo 16/4 Token Ring ISA adapter and drivers disk version 2.22.

• Driver File: IBMTOK.SYS, version 10.27

• Microsoft Windows NT 4.0 Workstation media.

• Microsoft Windows NT 4.0 Service Pack 4 media.

• Novell NetWare 4.11 Server system that supports IPX network protocol.

• Novell IntranetWare Client for Windows NT v4.11b installation media.

Device Configuration

Interrupt

I/O Address

Procedure

1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA

adapter into a PCI slot.

2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA

adapter.

3 Log onto Windows NT4 Workstation with administrator privileges

(Contact your network administrator if you do not have the required

information).

4 Right-click on the "Network Neighborhood" icon and select "Properties".

5 Click on "Yes" when prompted to install Windows NT Networking.

6 Select "Wired to the network" and click on "Next".

7 Click on the "Select from list..." button and then the "Have Disk..."

button.

Vectra Vli8

300