HP Vectra VLi8 Installation Manual page 25

Ibm turbo 16/4 token ring isa adapter

Hide thumbs Also See for Vectra VLi8:

Microsoft Windows NT

3.51 Workstation

Connecting to a

Windows NT4.0 Server

10 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter

Microsoft Windows NT 3.51 Workstation

10 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter

Requirements

• HP Vectra with Windows NT 3.51 Workstation.

• IBM Turbo 16/4 Token Ring ISA adapter and drivers disk version 2.22.

• Driver File: IBMTOK.SYS, version 10.27

• Microsoft Windows NT 3.51 Workstation media.

• Microsoft Windows NT 3.51 Service Pack 5 media.

• Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink

IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols.

Device Configuration

Interrupt

I/O Address

Procedure

1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA

adapter into an ISA slot.

2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA card.

3 Log into Windows NT with administrator privileges.

4 Open the "Network" icon in the "Control Panel" program group.

5 Click on "YES" in the "Network Settings" dialog box to install Windows NT

Networking.

6 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive.

7 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the

Windows NT 3.51 CD) in the dialog-box of the Windows NT Setup window

and click on "Continue".

8 Click on the "Do Not Detect" button from the "Network Adapter Card

Detection" window, and click on the "Continue" button in the following

"Network Adapter Card Detection" window.

Vectra Vli8

300