HP Vectra VLi8 Installation Manual page 10

7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and
click "OK".
8 Remove the IBM diskette from the floppy drive and click on "YES" to
restart the system when prompted.
9 Insert the "Novell Client for Windows 95" CD in the CDROM and execute
"Setup.exe".
10 Click on "Yes" to accept the License Agreement.
11 Select "Custom" installation and click on "Next".
12 Select "Bindery (NetWare 3.x)" and click on "Next".
13 Click on "Install" to start the installation.
14 Click on "Yes" to set the Preferred Server. (If you do not have the
required information, contact your network administrator).
15 Click on "Reboot" to complete the installation.
16 Right-click on the "Network Neighborhood" icon and select "Properties".
17 Accept the default Network Protocols and the Primary Network Logon
(Client for NetWare Networks) as seen below and click on "OK". (If you
do not have the required information, contact your network
administrator)
18 Client for NetWare Networks
Client for NetWare Networks
IBM Turbo 16/4 Token-Ring ISA Adapter
IPX/SPX-compatible Protocol
NetBEUI
19 Click on "OK" to accept the configuration.
20 Specify the path to your Windows 95 files when prompted.
3 Installing the IBM Turbo 16/4 Token Ring ISA Adapter
Connecting to a Novell NetWare 3.12 Server