HP Vectra VLi8 Installation Manual page 29

Ibm turbo 16/4 token ring isa adapter

Hide thumbs Also See for Vectra VLi8:

Microsoft Windows for

Workgroups 3.11

Connecting to a

Windows NT 4.0 Server

12 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter

Microsoft Windows for Workgroups 3.11

12 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter

Requirements

• HP Vectra with Windows for Workgroups 3.11.

• IBM Turbo 16/4 Token Ring ISA adapter and driver disk version 2.22.

• Driver File: IBMTOK5.386, version 5.51

• Microsoft Windows for Workgroups 3.11 media.

• Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink

IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols.

Device Configuration

Interrupt

I/O Address

Procedure

1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA

adapter into an ISA slot.

2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA

adapter.

3 After Windows loads, open the "NETWORK" Program Group, and double-

click on "Network Setup".

4 Click on the "Networks" button in the "Network Setup" dialog box.

5 Click on the "Install Microsoft Windows Network:" option, and click "OK".

6 Click on the "Drivers" button from the "Network Setup" dialog box, and

click on "Add Adapter".

7 Click "OK" to accept the default choice of "Unlisted or Updated Network

Adapter".

Vectra Vli8

A20