HP Vectra VLi8 Installation Manual page 27

Ibm turbo 16/4 token ring isa adapter

Hide thumbs Also See for Vectra VLi8:

Microsoft Windows

NT3.51 Workstation

Connecting to a Novell

NetWare 4.11 Server

11 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter

Microsoft Windows NT3.51 Workstation

11 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter

Requirements

• HP Vectra with Windows NT3.51 Workstation.

• IBM Turbo 16/4 Token Ring ISA adapter and drivers disk version 2.22.

• Driver File: IBMTOK.SYS, version 10.27

• Microsoft Windows NT3.51 Workstation media.

• Microsoft Windows NT 3.51 Service Pack 5 media.

• Novell NetWare 4.11 Server system that supports IPX network protocol.

• Novell IntranetWare Client for Windows NT v4.11b installation media.

Device Configuration

Interrupt

I/O Address

Procedure

1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA

adapter into a ISA slot.

2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA card.

3 Log into Windows NT with administrator privileges.

4 Open the "Network" icon in the "Control Panel" program group.

5 Click on "YES" in the "Network Settings" dialog box to install Windows NT

Networking.

6 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive.

7 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the

Windows NT 3.51 CD) in the dialog-box of the Windows NT Setup window

and click on "Continue".

Vectra Vli8

300