Solving Problems
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
❏ Do not load originals above the line indicated by the triangle symbol on the ADF.
❏ On the screen for copy, scan, or fax, check that the ADF icon is on. If it is off, place the originals again.
❏ Make sure that an original has not been placed on the scanner glass.
Related Information
"Available Originals for the ADF" on page 51
&
"Placing Originals on the ADF" on page 52
&
"Cleaning the ADF" on page 163
&
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P
button for a little longer.
Power Does Not Turn Off
P
Hold down the
button for a little longer. If you still cannot turn off the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it off by pressing the
Power Turns Off Automatically
❏ Select Power Off Settings in Settings, and then disable the Power Off If Inactive and Power Off If
Disconnected settings.
❏ Disable the Power Off Timer setting in Settings.
Note:
Your product may have the Power Off Settings or Power Off Timer feature depending on the location of purchase.
>
Power and Control Panel Problems
>
Power Turns Off Automatically
189
P
button.