Reboot; Chapter 20 Reboot; Overview; What You Need To Know - ZyXEL Communications NWA90AX User Manual

20.1 Overview

Use this screen to restart the Zyxel Device.

20.1.1 What You Need To Know

If you applied changes in the Web Configurator, these were saved automatically and do not change
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot. Otherwise, the changes are lost when you reboot.
Reboot is different to reset; reset returns the Zyxel Device to its default configuration.

20.2 Reboot

This screen allows remote users can restart the Zyxel Device. To access this screen, click Maintenance >

Reboot.

Figure 126 Maintenance > Reboot
Click the Reboot button to restart the Zyxel Device. Wait a few minutes until the login screen appears. If
the login screen does not appear, type the IP address of the Zyxel Device in your Web browser.
You can also use the CLI command reboot to restart the Zyxel Device.
NWA50AX/NWA90AX/NWA55AXE Series User's Guide
193
C
H A P T E R
Reboot
20