NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
XL7 Pole Mount Bracket, 7772/7773 This kit provides a Bracket to mount the XL7 Display on the CX7 Pole Mount. Kit Contents Installation Procedure 1. Remove the Cap from the Pole Mount.
Page 4
XL7 Pole Mount Bracket, 7772/7773 2. Install the Customer Display Bracket on the Pole Mount (3 screws). 3. Connect the Cable to the XL7 Customer Display. Tighten the thumbscrew. Note: Avoid overtightening the thumbscrew by turning it only until the silver knurled portion touches the black plastic overmold.
Page 5
XL7 Pole Mount Bracket, 7772/7773 4. Route the XL7 Display Cable through the Customer Display Bracket and down the Pole. Note: If there’s a hole in the countertop, the cables can be routed through the counter as well. 5. Install the Display on the Customer Display Bracket (4 screws).