Download Print this page
NCR 7772 Kit Instructions

NCR 7772 Kit Instructions

Xl10 pole mount bracket
Hide thumbs Also See for 7772:

Advertisement

Quick Links

Kit Instructions
XL10 Pole Mount Bracket, 7772/7773
7772-K402
Issue A

Advertisement

loading

Summary of Contents for NCR 7772

  • Page 1 Kit Instructions XL10 Pole Mount Bracket, 7772/7773 7772-K402 Issue A...
  • Page 2: Revision Record

    NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
  • Page 3: Kit Contents

    XL10 Pole Mount Bracket, 7772/7773 This kit provides a Bracket to mount the XL10 Display on the CX7 Pole Mount. Kit Contents Installation Procedure 1. Remove the Cap from the Pole Mount.
  • Page 4 XL10 Pole Mount Bracket, 7772/7773 2. Install the Customer Display Bracket on the Pole Mount (3 screws). 3. Connect the Cable to the back of the XL10 Display and route the Cable around the cable strain relief posts as shown.
  • Page 5 XL10 Pole Mount Bracket, 7772/7773 4. Route the XL10 Display Cable through the Customer Display Bracket and down the Pole. Note: If there’s a hole in the countertop, the cables can be routed through the counter as well. 5. Install the Display on the Customer Display Bracket (4 screws).

This manual is also suitable for:

7773