HP ProLiant xw25p User Manual page 28

IMPORTANT: If you are using the diagnostic station for operating system deployment or
file management, connect an additional network cable with RJ-45 connectors between the
NIC 1 connector and the hub.
4. Connect an additional network cable with RJ-45 connectors between the
client PC (1) and the hub (2).
Figure 16: Connecting a network cable to the client PC
and the hub
5. Connect the following items to the hub:
a. Network cable with RJ-45 connectors from the diagnostic station NIC 4
connector
b. Network cable with RJ-45 connectors from the client PC
c. DHCP server (optional), if not already connected
d. Network cable with RJ-45 connectors from the diagnostic station NIC 1
connector (optional)
e. Deployment server or file server (optional)
6. Connect the diagnostic station AC power cord to an AC outlet.
28 HP ProLiant BL p-Class System Diagnostic Station User Guide