HP ProLiant xw25p User Manual page 25

3. Connect the monitor to the video connector on the local I/O cable.
4. Connect a USB hub to the USB connector on the local I/O cable.
NOTE: Use of the USB hub is optional as you may connect to the server using any
combination of USB devices. For example, you may connect a monitor to the video
connector and a USB mouse and USB keyboard to the USB connector.
5. Connect the following to the USB hub:
a. USB CD-ROM and/or USB floppy
b. USB keyboard
c. USB mouse
HP ProLiant BL p-Class System Diagnostic Station User Guide
CAUTION: Disconnect the local I/O cable when not in use. The port and
connector do not provide a permanent connection. Rear iLO connector
performance degrades when the local I/O cable is in use, even when the iLO
connector on the cable is not in use.
25