HP ProLiant xw25p User Manual page 23

IMPORTANT: The diagnostic station ships with several AC power cords of different outlet
plug configurations. Be sure to select the proper AC power cord for the electrical service.
10. Connect the AC power cord to the diagnostic station (1).
11. Connect the other end of the AC power cord to an AC outlet (2).
NOTE: Previously installed components have been removed for clarity.
Figure 12: Connecting the AC power cord
NOTE: Depending on which server blade you are using, you may need to install a second
power supply in the diagnostic station. A second power cord would also be required.
HP ProLiant BL p-Class System Diagnostic Station User Guide 23