Advertisement
2.0 Overview
1.
2. Bracket
3. Mounting Base
It is recommended to install the security cap for outdoor installation.
If the PoE switch is used, the DC12V power supply is not required.
Connecting Network Cable
1.
2. Run the network cable (without RJ 45 connector) through both elements. Then crimp
3. Connect the cable to the hermetic connector. Then tighten the nut and the main
6
Sunshield
Loosen the nut from the main element.
the cable with RJ 45 connector.
cover.
4. Network Cable
5. MIC In Cable
6. Power Cable
Security Cap
DC12V
Advertisement
