Advertisement
2.0 Overview
1.
2. Mounting Base
3. Network Connector (It is recommended
4. Audio Input
Connecting Network Cable
1.
2. Run the network cable (without RJ 45 connector) through both elements. Then crimp
3. Connect the cable to the hermetic connector. Then tighten the nut and the main
6
Fixed Ring
to install the security cap for outdoor
installation)
Loosen the nut from the main element.
the cable with RJ 45 connector.
cover.
5. Power Connector (If the PoE switch
is used to power the camera, DC12V
power supply is not required).
6. Micro SD Card Slot
7.
Reset
Security Cap
DC12V
Advertisement
