Zone Assignment; Telephone Numbers; First Telephone Number (32 Digits); Second Telephone Number (32 Digits) - DSC Envoy NT9005EU Installation & Programming Manual

[202]-[205] Zone Assignment

These eight bit toggle sections determine which zones on the system
are enabled. All zones that are enabled will be supervised via the
panel's EOL supervision, and will operate according to the zone type
programmed. If a zone is disabled, it will not be supervised and
zone activity will be ignored by the panel.
Attributes may be programmed by zone. See section [101-
132]
Section Zone Enabled
[202] 01
02
03
04
05
06
07
08
[203] 09
10
11
12
13
14
15
16
[204] 17
18
19
20
21
22
23
24
[205] 25
26
27
28
29
30
31
32
FLASH

[301]-[311] Telephone Numbers

The telephone numbers entered here are for use by the system to
send reporting codes to the central monitoring station, a residential
telephone or pager.
All telephone numbers are 32 digits in length. Hexadecimal digits
may be programmed in the telephone number to perform certain
functions.
Disabled
[301] First Telephone Number (32 Dig-
its)

[302] Second Telephone Number (32 Digits)

[303] Third Telephone Number (32 Digits)

[310] Phone Number 1/3 Account
Code
This is the Account Code used by the panel when communicating
via Phone Numbers 1 and 3

[311] Phone Number 2 Account Code

This is the Account Code used by the panel when communicating
via Phone Number 2.
firealarmresources.com
[202]-[205] Zone Assignment
The default for contents of sections [301]-[303] is D followed
by 31 'F's:
Enter [*][2][*] Hex B to dial '*'
Enter [*][3][*] Hex C to dial '#'
Enter [*][4][*] Hex D for additional dialtone search (required
for PBX telephone systems)
Enter [*][5][*] Hex E to insert a 2 second pause in the tele-
phone number
HEX A is not used
HEX F represents the end of the Phone Number (everything
after F is ignored)
Pressing [#] in these sections will exit and save the entire
phone number.
If a telephone number is not programmed, the panel will not
attempt to communicate.
This applies to Telephone Numbers 1 and 2.
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
Use the [F] key to terminate phone number programming in
sections [301] - [303].
Default FFFF I___I___I___I___I
Default FFFF I___I___I___I___I
FLASH
FLASH
Codes are 4 digits in length.
Valid entries are 0000-FFFF.
Codes are 4 digits in length.
Valid entries are 0000-FFFF.
33